Home Small crawler excavator-manufacture,factory,supplier from China

Product DetailsThe 1.5T crawler excavator is very suitable for home, garden, or outdoor construction and landscaping operations. It can be used for various projects, such as using a bucket to excavate foundation pits to build greenhouses, using a bulldozer to remove debris from overturned walls, and even using a boom to lift heavy objects such as hay bales. The zero tail swing and narrow track width allow the machine to reach areas that are difficult to enter, such as inside buildings, next to walls, or narrow passages.

Product DetailsThe important hinge parts of the 3.0T crawler excavator bucket rod adopt a forged structure, which can alleviate stress and improve durability by changing the shape and plate thickness. The boom is formed by integral welding, and finally bored by the boring machine and treated with alkane, which can effectively strengthen the robustness of the large and small arms, extend the service life of the pins and sleeves, and avoid welding fracture at the welding point, making it durable.

ProductDetailsThe 2.2T crawler excavator has a beautiful appearance, high configuration, superior performance, low fuel consumption, and a wide range of operations. It is suitable for vegetable greenhouses, municipal landscaping, orchard and nursery planting pits, concrete pavement crushing, sand and stone mixing, small space construction operations, etc.

ProductDetailsThe 2.0T crawler excavator arm is formed by overall welding, and finally bored by the boring machine and treated with alkane, which can effectively strengthen the robustness of the large and small arms, extend the service life of the pins and sleeves, and avoid welding fractures at the welding points, making it durable.

Product DetailsThe 1.8T crawler excavator load sensing system achieves a perfect match between the engine and the main pump, accurately providing flow, improving work efficiency, saving fuel and time. The product is widely used for indoor demolition, orchard planting, municipal engineering, greenhouses, land reclamation, nursery trenching and fertilization, pipelines, basement renovation, underground operations, etc.Beneficial for transportation and moving the workplace. Small excavators are beneficial for relocation between construction sites.

Product DetailsThe oil filter, pilot oil filter, fuel filter, and oil-water separator of the 1.8T crawler excavator are installed in places that can be inspected and replaced on the ground.Due to the relevant hydraulic power unit, small excavators can be equipped with many specialized tools for auxiliary work, such as installing road rollers and level compactors, used for landfill compaction of pipe trenches; Install excavator hammers, hydraulic shears, and disassemble gently; Install rotary drilling tools for drilling and fish hooks for lifting objects; Install finger pliers to eliminate thes

Product DetailsThe 3T tracked excavator is a sturdy and efficient machine with a small size, making it ideal for leasing fleets, homeowners, builders, plumbers, electricians, and other skilled workers or anyone who needs to work under limited conditions. It integrates the functions of a large excavator, with key components designed and manufactured by ROC that can work together in an integrated component.

ProductDetailsThe arm of the 1.5T crawler excavator is formed by overall welding, and finally bored by the boring machine and treated with alkane, which can effectively strengthen the robustness of the large and small arms, extend the service life of the pins and sleeves, and avoid welding fractures at the welding points, making it durable and durable.Product parameterPerformance parametersBucket capacity (m³)          0.025Rotation speed (rmp)              14Maximum climbing angle (°)30Maximum digging force of bucket (KN)&n

ProductDetailsThe 2.2T crawler excavator has a small volume and flexible mobility, making it very suitable for various pipeline excavation, foundation construction, public utilities, and house maintenance operations in cities and towns. The compact volume and special design of small excavators enable them to operate in environments where large excavators cannot be constructed, and they have versatility.

ProductDetails2.2T small tracked excavator high-end configuration: The main pump, main valve, rotary motor, walking motor, oil cylinder, pilot control valve and other components are all made of internationally renowned brands, ensuring the quality of the product. The latest research results are integrated to reduce energy consumption, improve design, respond faster, and have strong and precise rotation control.

Product DetailsThe 1T tracked excavator has a smaller size and can be installed in narrow spaces, and can pass through narrow entrances that large machines cannot reach. This makes it very suitable for working in residential areas or urban environments with limited space. Small excavators can be equipped with a range of accessories, such as hammers, augers, and rippers, which enable them to perform various tasks.

ProductDetailsThe electric throttle control system of the 2.2T small tracked excavator fully utilizes the engine power to maintain the best efficiency and economy of the machine under different operating conditions. The automatic idle function is activated. If the machine does not operate for 5 seconds, the engine will automatically idle to save fuel and reduce noise.

Product DetailsThe price of a 1.0T tracked excavator is cheap and the cost recovery is fast. The rubber tracks of a small excavator help reduce damage to narrow construction areas and roads during excavator construction. The bucket cutting plates are made of special wear-resistant steel plates, which are suitable for heavy-duty operations.

Product DetailsThe 1.8T small tracked excavator uses thickened steel plates and adds side reinforcement plates to improve wear resistance; The important hinge parts of the bucket handle adopt a forged structure, which can alleviate stress and improve durability by changing the shape and plate thickness. The bucket cutting plates are made of special wear-resistant steel plates, which are suitable for heavy-duty operations. They are equipped with wear-resistant bucket teeth and side teeth to improve the performance of the machine.

Product DetailsThe 1.5T crawler extractor automatic idle function: Enable the automatic idle function.

Product DetailsThe width of the 1.5T tracked excavator is slightly more than one meter, but many small excavators are equipped with retractable tracks, making them thinner machines. Taking the Kubota ROC15 as an example, its standard width is only 1300 millimeters, but after being pulled into the track, its width is only 990 millimeters.

Product DetailsThe 2.0T small tracked excavator has a large capacity fuel tank, which enables long-term operation. The large toolbox is more conducive to the storage of spare items, intelligent operation and display, and all operation controls are designed and arranged according to ergonomic theory.

Product DetailsThe 1.8T small tracked excavator adopts an internationally renowned brand engine that meets the Euro 5 emission standards. It has high torque, strong power, energy-saving and fuel-efficient features, advanced hydraulic system, funnel shaped fan cover, greatly improving the engine's air intake and system heat dissipation capacity, ensuring continuous and efficient operation of the machine.

Product DetailsThe 1.5T crawler excavator has good performance, and the design of the improved cross section shape of the crawler frame reduces soil accumulation, making the carrier roller less prone to wear, and improving the durability of the machine.Product parameterPerformance parametersBucket capacity (m³)          0.025Rotation speed (rmp)              14Maximum climbing angle (°)30Maximum digging force of bucket (KN) 9Maximum digging force of bucket rod (KN)             5.5Engine mod

Product DetailsThe precise matching design of the 1T crawler excavator, coupled with advanced energy-saving control, reduces the machine's fuel consumption. Integrate the latest research results, reduce energy consumption, improve design, and respond faster.

Product Details1.0T crawler excavator dual pump combined flow technology: increases the flow rate of the main valve to the boom, stick, and bucket oil cylinders, improves the operating speed, and provides strong and precise rotation control.

Product DetailsThe 3.0T crawler excavator has an integral reinforced chassis, robot welding, and weld forming that completely eliminates the influence of human factors. The arc is stable, the melting depth is controllable, and the forming is beautiful.

Product DetailsThe 3.0T crawler excavator electric throttle control system fully utilizes engine power to maintain the best efficiency and economy of the machine under different operating conditions. Dual pump confluence technology: increases the flow rate of the main valve to the boom, stick, and bucket oil cylinders, improves operating speed, is sturdy, durable, and highly reliable.

ProductDetailsThe 2.2T crawler excavator increases the sunroof glass to improve upward visibility and increase ventilation. The doors and windows are made of tempered glass, which is a sunshade to prevent direct sunlight; All operational controls are designed and arranged according to the theory of ergonomics, and all operational controls are designed and arranged according to the theory of ergonomics.